STOP REPLACING PLYWOOD. START UPGRADING TO COOSA.

line-white

The stronger, lighter panel solution for modular and prefabricated construction.

PLYWOOD WASN'T BUILT FOR THIS

Modular construction moves the build off the job site and into a controlled factory. That means every module gets fabricated, loaded, shipped down the highway, stored, and set in place before it ever holds an occupant. Plywood was never engineered for that journey.

Plywood absorbs moisture during transport and storage. It warps. It swells. It rots. It gains weight the wetter it gets, which drives up freight costs, slows your set crew, and eats into the tolerances your factory worked hard to hold.

Modular builders need a core material that leaves the plant strong and arrives on site exactly the same.

Untitled design (87)

COOSA COMPOSITE PANELS:
BUILT FOR THE MODULE

COOSA COMPOSITE PANELS: BUILT FOR THE MODULE

Coosa panels are constructed with high-density, closed-cell polyurethane foam reinforced with woven roving continuous strand fiberglass. They deliver the structural strength of plywood without the weaknesses. They will not absorb water. They will not warp, swell, rot, or delaminate. And Bluewater panels weigh up to 40% less than plywood, which means lower freight costs, easier setting, and fewer hands on every module.

This is the same composite panel technology trusted by more than 200,000 boats on the water, over 80 OEM manufacturers, and major transportation builders for more than 25 years. Now it is built into modular and prefabricated structures.

WHY MODULAR BUILDERS ARE MAKING THE SWITCH

30 TO 50% Lighter

Lighter modules mean lower transport costs, easier craning and setting, and less dead load on the frame. Your crew moves faster and your budget stretches further.

Zero-Rot, Moisture Prooft

Less than 1.5% water absorption. Panels will not rot, swell, or delaminate through shipping, outdoor storage, or years of service.

Dimensionally Stable

Panels hold their shape through transport, staging, and repeated temperature and humidity swings. The tolerances you set in the factory are the tolerances you get on site.

Mold, Mildew, & Insect Proof

Closed-cell construction gives mold, mildew, and insects nothing to feed on. No surprises when a module comes out of the yard.

Higher R-Value Core

Coosa panels offer 2 to 3 times the insulating R-value of plywood, contributing to a stronger thermal envelope as a core material within the wall and floor system.

Fire-Rated Options Available

Fire-rated panels meet ASTM E84 Class A for flame spread and smoke generation. Standard panels meet FMVSS 302.

Coosa vs. Plywood: Side by Side

Feature Plywood Coosa Panels
Weight Heavy, and heavier when wet 30 to 50% lighter
Water Absorption Absorbs water and swells Less than 1.5%
Rot / Mold Resistance Susceptible over time Immune
Dimensional Stability Warps, shrinks, and shifts with use Dimensionally stable through transport and service
Thermal Value Minimal 2 to 3 times the insulating R-value of plywood
Fire Safety No fire rating, higher flame spread risk Fire-rated options meet ASTM E84 Class A
Lifespan Frequent replacement needed Limited lifetime warranty
Workability Can splinter, may require treatment Cuts and machines with standard woodworking tools
Untitled design (74)

ONE CORE. EVERY MODULE.

Build with confidence. Coosa panels deliver the structural reliability and lightweight performance that modular and prefabricated construction demands, from floor systems to interior walls to exterior cladding. The same panel that outperforms plywood on the water outperforms it inside the module.

Applications supported:

  • Sub-flooring and floor systems

  • Interior and partition walls

  • Exterior cladding

  • Doors and door cores

  • Cabinetry and casework

  • Architectural and decorative elements

  • Blast-resistant module interiors and fixtures

Available in standard 4' x 8' panels in multiple thickness options. Fire-rated variants available in the Bluewater and Nautical series. Fire-rated options meet ASTM E84 Class A. Standard panels meet FMVSS 302.

BUILT INTO BLAST-RESISTANT MODULES

Blast-resistant modular buildings protect personnel and equipment in the most demanding environments, including refineries, petrochemical plants, chemical processing facilities, and other high-risk sites governed by API RP 752 and 753. These modules are engineered around a heavy steel frame and blast-rated wall system that carry the overpressure load and deliver the unit's blast rating.

Inside that engineered assembly, every component has to earn its place. Coosa panels serve as substrate, backing, casework, and cabinetry within blast-resistant modules, contributing lightweight strength, zero-rot moisture resistance, and fire-rated options without adding the moisture, weight, and rot problems that come with plywood. Coosa panels contribute to the module. The engineered steel assembly provides the blast resistance.

For builders specifying interior fixtures and non-structural components in blast-resistant and hardened modular structures, Coosa delivers a core material that holds up to the environment those buildings are made for.

Note: Coosa panels are a component within a layered assembly. They do not independently provide blast resistance.

TRUSTED WHERE IT MATTERS

For over 25 years, Coosa Composites has manufactured fiberglass-reinforced composite panels from our plant in Alabama, serving the marine, transportation, construction, and industrial markets worldwide.

  • 25+ years of composite panel manufacturing

  • 200,000+ boats on the water using Coosa panels

  • 80+ OEM manufacturers building with Coosa

  • Panels shipped across North America and globally

  • Made in the USA (Pelham, Alabama)

Untitled design (73)

Product Details

READY TO UPGRADE YOUR BUILD?

Whether you are replacing plywood in your module line or specifying core materials for a new modular program, Coosa panels are the smarter long-term investment. Contact our team to discuss your project, get a quote, or request a sample.